Cashback & Shopping Points

  • 1,5% Cashback + 8% On your purchase
  • Accepted
    Scan & Go
    myWorld Card



ATK Signs has 35 years of combined experience and knowledge in the manufacture and installation of signage. We offer the most efficient and cost-effective products to suit your budget, without undermining quality standards. With our skilled staff, infrastructure and experience, we can meet all your signage requirements with professional confidence and discretion and give added benefit with our cutting-edge designs.

We are the one stop signage shop & we will be expanding in the near future. ATK & the professional staff will always be ready to assist with any signage needs.
Chromadeck Signs
Aluminium Slat Signs
Display Signs
Fluorescent Signs (Light Boxes)
Neon Signs
Fabricated Perspex Signs
Vinyl lettering
Silk Screening

Graphics and Design:
Image scanning and conversion to CD
Digital printing to any size
Poster Design
Image Design services

Chromadeck Signs:
Chromadeck signs are manufactured using an enamel coated and baked steel sheet between .6mm and .8mm thick. Chromadeck comes in a variety of colours but white is the most common used.
To add rigidity to the sheet a 25mm square tubing is welded up onto which the sheet is then pop riveted.
A standard sheet size is 1225mm x 2450mm. If the sign needs to be bigger the sheets can be panelled. In this way very, large bill boards can be manufactured.

Correx, ABS & Perspex:
There are many different kinds of plastic sheets that vinyl lettering can be applied to. The most common (which also come in a variety colours) plastics are: 

A rigid plastic sheet between 3mm and 20mm thick with a high gloss surface finish both sides. Normally used in higher quality more expensive signs, e.g. Office signage. Perspex has a very good outdoor life span.

More flexible than perspex and is much more economical. Though not as glossy and perceived quality is not as high. ABS also come in much thinner sheets, between .8mm to 5mm. It’s most common purpose is used for escape route and fire signage in buildings.

A light inexpensive and fluted plastic sheet. Does not have a long outdoor life span and is generally used as temporary signage. It’s most common use is for Estate Agent boards. Other plastic sheeting that can be used is Forrex, UHI, Polycarbonate, Polystyrene and Agro Glass. These sheets have many of the same properties as Perspex and ABS.

Illuminated signs: 
Illuminated signs can come in different forms, for example;
Light boxes, these are manufactured from Aluminium extrusion with fluorescent tubes inside covered with either a digital printed Flex Face or Perspex face depending on the size and preference of the client. There are very big varieties when it comes to the signage industry – To give you a better overlook on all the products you can visit our web page.


Can't find your purchase at ATK Signs?

* The margin benefits are dependant on the products purchased and the Loyalty Merchant. All hereto information on this website is therefore without guarantee.